Sub-Engineer 50 Past Question Mock Test #3

1. The missing station of the ground survey can be found out with the help of

2. The spacing of cross-sections in a hilly country is usually

3. A contour map of the area is essential before proceeding with the construction of

4. The box of prismatic compass is made of

5. As compared to English bond, double Flemish bond is

6. The practical limit of moisture content achieved in air drying of timber is

7. Thinner used for oil paint is

8. Pigments are available in the form of

9. If the number of members provided is more than the requirement, then the frame
is called as

10. When a rectangular beam is loaded transversely the maximum compressive
stress develops on

11. The bending moment is maximum on a section where shearing force

12. The tensile test is carried on ……. materials,

13. The discharge through a rectangular channel is maximum when

14. The point, through which the buoyant force is acting, is called

15. The flow in channel is turbulent if the Reynold number is

16. The tendency of a small drop of fallen water to remain in a spherical form is due
to the property of

17. Mode of transportation for alluvial soils is generally

18. Falling head permeability test is preferable when soil sample is

19. The compression resulting from long term static load and resulting expulsion of
water is known as

20. The ratio of the unit weight of soil solids to that of water is called

21. In a two way slab the torsional reinforcement is provided at

22. The reinforcing bars in beams are not bundled in contact if the diameter of the
bars, exceeds

23. For a longitudinal reinforcing bar in a column, the cover should not be less than

24. Increased depth of a beam cause

25. The inner section of a cavity wall, is generally known as

26. Nosing is the outer projecting edge of

27. A roof which slopes in all the four direction is

28. The sill window in residential building is generally kept above the floor level by

29. The aeration of water is done for the removal of

30. Water from the following source is likely to be hard

31. Flush air inlet is sometimes called

32. If the sewage contains grease and fatty oils, these are removed in

33. Surface float method is used to measure

34. Lining of canal……. The maintenance of the canal

35. The alluvial soil, side of the canal in filling should be

36. The difference in level between the top of a bank and supply level in canal, is
called

37. Useful life of permanent bridges is considered to be

38. Green color indicates

39. Caissons are usually made of

40. The best stabilizer for black cotton soil is

41. The floor area includes the area of the balcony up to

42. The unit of payment for A.C. sheet roofing is in

43. Original cost of property minus deprecation is

44. The loss of value of property by its becoming out of date is style in design, in
structure etc, is called as

45. The performance of a specific task in CPM, is known

46. Jit Nepal, Public procurement Act (PPA), was effective from

47. The time with which direct cast does not reduce with increase in time is known as

48. Amount required to be deposited by contractor while submitting tender is

49. Which of the following is used for servicing and repairs of the aircraft?

50. The type of hanger used for parking of large size aircraft is called